Magnum Energy MPSL250-30D Panel Single Enclosure

Be the first to review this product

Availability: In stock

$1,313.99
OR

Quick Overview

  • Single Enclosure Low Power w/30A dual pole AC input breaker, 2 Inv. Max
  • Wide range of inverter/chargers for any application
  • Easy to set up and use
  • Industry-leading durability
  • Warranty: 5 years
  • Magnum Energy MPSL250-30D Panel Single Enclosure

    More Views

    Details

    Magnum Energy MP Magnum Panels

    Magnum Panel Single Low-power enclosure allows for up to 2 inverter/chargers to be installed. Ships with pre-wired breakers, pre-stripped AC wires and hood. Inverter not included.

    The MP Magnum Panels are available in three sizes, each with either a 30 A two-pole 120/240 VAC output breaker or a 60 A 120 VAC output breaker. They are designed for use with two series-stacked MS4024 inverters, or up to four parallel-connected MS-PAE inverters. The MPSL (Magnum panel, single enclosure, low capacity) accommodates one or two inverters with the use of an MPX Extension Box. It includes a 175 or 250 A DC breaker, a 125 A AC bypass breaker, a 500 A/50 mV shunt and inverter AC input protection, and all AC/DC wiring for dual inverters (source/ load wiring not included). There is space for five 1" back-mount breakers or ten ½" DIN-mount breakers on the DC side.

    The MPSH (Magnum panel, single enclosure, high capacity) accommodates a maximum of three inverters. One inverter can be connected directly to the MPSH. Each additional inverter requires an MPX. The MPSH includes one 175 or 250 A DC breaker, a 125 A AC bypass breaker, a 1,000 A/100 mV shunt and inverter AC input protection, and AC/DC wiring for dual inverters (source/load wiring not included).

    NOTE: There are no spaces for extra DC breakers in the MPSH, so it may be limited to backup systems. Use the MPDH for three or four-inverter systems with solar or other DC input. The MPDH (Magnum panel, dual enclosure, high capacity) accommodates as many as four inverters with two enclosures – one for AC and one for DC connections. Two inverters can be connected to the MPDH. The third and fourth inverters require one MPX for each. The MPDH includes two 175 or 250 A DC breakers, a 125 A AC bypass breaker, a 1,000 A/100 mV shunt and inverter AC input protection, and all AC/ DC wiring for dual inverters (source/load wiring not included). There is room for seven 1" back-mount breakers or fourteen ½" DIN-mount breakers on the DC side. Mount and connect additional inverters to MP Series Systems Panels using MPX Series Extension Boxes.

    They mate to the bottom of Magnum MS4024 or the MS-PAE inverters. The boxes include a 175 or 250 A DC breaker and wiring for an additional inverter. Left and right-hand versions mount on either side of an MP Panel. An MP-HOOD inverter hood (not shown) allows vertical mounting. Choose the extension box model that corresponds to the MP enclosure and which side it will be installed on.

    The rugged, steel MPSL250-30D enclosures have been designed to combine all of the major components for a high power renewable energy system in one convenient, pre-wired unit. Magnum's easy-access, front panel operation allows you to set-up, monitor, and operate up to two MS-PAE inverter/chargers with the optional ME-RTR router. All of Magnum's enclosure panels are UL and CSA certified for code compliance. 

    Magnum Energy’s MPSL250-30D enclosures feature a full system bypass switch, allowing for a convenient way to isolate the inverters for battery maintenance. 

    Features & Attributes
  • Accommodates either DIN rail or back-mount DC load breakers.
  • Accepts 120VAC or 120/240VAC output wiring.
  • Front-mounted breakers
  • Efficient footprint at only: 16” wide, 23” tall, and 8” deep.
  • ETL listed to UL1741 and CSA C22.2 107-01

    Includes:
  • One 250A DC Breaker.
  • Dual 30A AC input breaker.
  • Dual 30A AC output breaker.
  • Dual 30A AC bypass breaker.
  • 500A/50mv DC shunt.

  • Specification

    Brand MAGNUM ENERGY
    Series MP
    Manufacturer Part Number MPSL250-30D
    Warranty 5 years
    Width 18.0
    Height 15.0
    Weight 50.0
    Length 27.0

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.