Bogart Engineering Surface-Mount Box

Be the first to review this product

Availability: In stock

$27.50
OR

Quick Overview

  • Surface-mount box
  • Compatible Models: TM-2020 and TM-2025-A
  • Warranty: 5-years
  • Bogart Engineering Surface-Mount Box

    More Views

    Details

    Bogart Engineering TriMetric 2030 and 2030-RV

    This meter operates on 12, 24 or 48 VDC. LEDs show volts, amps, and amp-hours. Amp-hours can be displayed directly or as “% full.” One LED indicates charging and fully-charged states. Another LED indicates when charging or equalization is needed and warns of low battery-voltage events. The meters also record minimum and maximum voltage, days since last charge, days since last equalized, and total lifetime amp-hours withdrawn. The TriMetric can be located up to hundreds of feet away from batteries using inexpensive four-conductor twisted-pair meter wire. A shunt is required for operation. Use the 500 A shunt on a 12 VDC inverter larger than 800 W, or a 24 VDC inverter larger than 1,600 W. Use a 1,000 A, 100 mV shunt for systems with stacked inverters or where continuous current is over 300 A. The 1,000 A/100 mV shunt has the same resistance as the 500 A/50 mV shunt and may be used interchangeably. Order the shunt separately. These meters work with battery banks up to 2,500 Ah.

    The positive lead to the TriMetric should be fused with the included 1 A fuse. This meter can be mounted flush or with a wire mold. Trimetric meters are made in U.S.A., have dimensions of 4.5"W x 4.75"H, and are covered by a 2-year warranty.

    Product Highights
    The TriMetrics with “A” suffix are designed to fit into a “double gang electrical boxes”. Size 4-3/4 x 5 x 2 in.; 12 X 12.5 X 4.5 cm

    SPECIFICATIONS

    Brand Bogart Engineering 
    Series Trimetric Battery Monitor
    Manufacturer Part Number WBM
    Description Surface-mount box
    Compatible Models TM-2020 and TM-2025-A
    Length 5.0  IN
    Width 4.75  IN
    Height 1.75  IN
    Weight 0.32  LB

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.