SolaDeck 0786-3R5 Roof Mount Pass Through Box

Be the first to review this product

Availability: In stock

$109.99
OR

Quick Overview

  • For AC or DC current
  • Deadfront (Y/N): No
  • Material : 18 Gauge G 90 Steel Base/Cover
  • Process: Seamless draw (stamped)
  • SolaDeck 0786-3R5 Roof Mount Pass Through Box

    More Views

    Details

    SolaDeck PV Roof-Mount Enclosure

    These are NEMA 3R enclosures that provide a flashed roof penetration for the array cables. They are all made from 18 gauge galvanized steel with a powder-coated finish providing a professional look. All have a dual ground lug, a 6" (150 mm) universal DIN rail to mount fuse holders or terminal blocks. There are three roof-deck knockouts (½", ¾", and 1") and dimples to center a punch or drill for entry conduit or fittings, as well as a built-in roof flashing.

    The SD-0786-3R is listed as a J-box and can be used for pass-through wiring of both DC and AC circuits without combining. The SD-0786-3R5 is similar but has a 5 position ground bar. Both SD-0786 are only 2.5" deep and can fit under the array.
    for up to 5 position pass through

    Specification:

    Manufacturer Part Number 0786-3R5
    Description SolaDeck enclosure pass-through AC/DC (no combining)
    Deadfront (Y/N) No
    Material 18 Gauge G 90 Steel Base/Cover
    Process Seamless draw (stamped)
    Flashing 15” x 15”
    Cavity 8” x 9” x 2.5” (162 Cubic inches)
    Finish- Powder coat (1100 hours salt spray)
    Length 16.0  IN
    Width 16.0  IN
    Height 3.0  IN
    Weight 7.5  LB

    Assembly:
  • Cavity Base and cover punched for matched assembly
  • Base Flashing pre-punched for roof deck mounting
  • Cavity Base - (5) predetermined dimples for fittings or conduit

    Base plate:
  • 16 gauge galvanized steel
  • Fastened to base flashing with toggle fastening system
  • Finish – Powder coat (1100 hours salt spray)
  • (5) Roof deck knockouts
  • Knockout sizes – (3).5”, (1).75” and (1)1”
  • Rail - 7” slotted 35mm

    Hardware pack:
  • 7 - 1” Truss head screws
  • 4 - .5” 8-32 thread cutting screws
  • 4 - Bonded seal washers #10
  • 2 – 10-32 ½” Steel studs
  • 2 – 10-32 3/8” steel star nuts
  • 1 – Foam gasket seal
  • 1 – Installation instructions

  • Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.