Samlex SDC-23 Step Down Power Converter

Be the first to review this product

Availability: In stock

$96.99
OR

Quick Overview

  • Switch-mode step-down DC-DC converter
  • Max Current: 20.0
  • Input Voltage: 24
  • Output Voltage: 13.8
  • Warranty: 2-years
  • Samlex SDC-23  Step Down Power Converter

    More Views

    Details

    Samlex DC-Step-Down Power Converter

    These switching DC-DC step-down power converters are designed to decrease DC voltage. They operate at high efficiency and provide regulated 13.8 VDC output from an input of 20-30 VDC. Use them to power 12 VDC lights and appliances from a 24 VDC system. Covered by a 2-year warranty.
    Switch-mode step-down DC-DC converter. Input voltage 24 VDC nominal to a highly regulated output voltage of 13.8 VDC at 12 Amps. The SDC DC-DC converters are non-isolated

    Design Features

  • Advanced switchmode design
  • Mount in almost any location
  • Compact and light weight
  • Reverse polarity protection
  • High efficiency
  • Cycle by cycle current limiting circuit
  • Over voltage protection
  • Short circuit protection

    Applications
  • Earth moving equipment
  • Heavy trucks
  • Buses
  • Marine vehicles
  • CB radios
  • 12 Volt lighting systems
  • AM / FM sound systems

    Specification:

    Series SDC
    Manufacturer Part Number SDC-23
    Warranty 2-years
    Max Current 20.0
    Input Voltage 24
    Output Voltage 13.8
    Continuous output current 20 A
    Peak output current 23 A
    Current Limit 24 ± 0.5 A
    Input Voltage 20-35 VDC
    Input Current at No Load < 150 mA
    Load Regulation 0.15 V, 26 V, 0 - 20 A
    Efficiency (at maximum output) > 88%
    Ripple < 50 mV P-P @ 20 A
    Noise < 120 mV P-P @ 20 A
    Operating Temperature Range 0 - 40º C
    External Input Fuse (at the battery end) 32 V, 10 A
    External Output Fuse 32 V, 15 A
    Protections Overload, short circuit
    Input Wire size #10 AWG
    Output Wire #8 AWG
    Length 4.96  IN
    Width 3.47  IN
    Height 1.93  IN
    Weight 2.0  LB
  • Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.