Outback Power System Display and Controller for UL 1741 SA Compliance

Be the first to review this product

Availability: In stock


Quick Overview

  • Designed for UL 1741 SA compliance
  • Display: 4.0 x 1.2” full graphical display
  • Status Indicators: (9) LED indicators
  • Navigational Controls: 5 navigational keys
  • Warranty: Standard 5 year Warranty
  • Outback Power System Display and Controller for UL 1741 SA Compliance

    More Views


    OutBack Power MATE Remote Monitors

    The MATE3s system display and controller is the latest generation communication interface – providing control of every aspect of an OutBack Power System. The MATE3s is specifically Designed for UL 1741 SA compliance. Program and monitor your power system with an intuitive user interface and integrated configuration wizard. The ability to set unique multi-level user passwords makes it possible to secure critical system settings from unintended changes while still allowing open access to necessary functions. An easy-to-read backlit graphical LCD display, a user-set favorite key, and scroll-wheel operation allow easy adjustment of system set points. Expandable SD card memory allows you to increase data-logging capacity as well as upgrade units in the field. Built-in clock and calendar enable timer-based programming, permitting the user to set the system up to work with time-of-use utility rates, or set up a generator to only run at certain times of the day or week. The MATE3s has permanent memory and includes OutBack Power’s best-in-class OPTICS Internet monitoring platform.

    OPTICS RE is a user-friendly online monitoring and control system that displays instantaneous and historical system performance via the Internet as well as provides remote troubleshooting and control functionality. Automated e-mail alerts can be set up to notify when faults or other events occur, enabling proactive maintenance. Most MATE3 system settings can be viewed and adjusted remotely via OPTICS RE, minimizing the need for on-site troubleshooting. OpticsRE is included with the MATE3s.

    The original MATE is able to connect multiple inverter/chargers to OutBack Power FM charge controllers and to other OutBack power conversion and control products. The MATE2 has a flush-mount black face for panel or in-wall mounting, but offers the same functionality as the MATE.

    NOTE: The original Mate and Mate3 do not work with all the functions and modes in the current OutBack Power inverters. Only the Mate3s will work with SA compliant inverters (-01).

    Product Highlights
  • Program, Manage and Monitor Entire System †
  • Intuitive Menu Structure †
  • Easy-to-Read Graphical Display †
  • System Configuration Wizard †
  • Internet Enabled †
  • Field Upgradable †
  • Up to 1-Year of Data Logging †
  • SD Memory Card Slot


    Brand Outback Power
    Manufacturer Part Number MATE3s
    Description Designed for UL 1741 SA compliance
    Display 4.0 x 1.2” full graphical display
    Quick System Access 5 system operation hot keys, 4 user programmable soft keys
    Status Indicators (9) LED indicators
    Navigational Controls 5 navigational keys
    Setpoint Adjustment Touch sensitive scroll wheel
    Communication Protocols Proprietary OutBack communications protocol and SunSpec Modbus
    Interconnect Cabling Included Standard CAT5 network cable with RJ-45 modular jack - 6’ (2m) included
    PCComputer Interface HTML system status dashboard over local intranet connection
    Field Update Capability Yes (includes Radian Series inverter/chargers and FLEXmax Series charge controllers [rev 3.0 or higher])
    Microprocessor 80MHz 32 bit processor
    Set Point and Data Memory 8Mb RAM/ 64Mb of flash RAM
    Clock/Calendar On-board real time clock with battery backup
    Operating Temperature Range 0 to 50°C
    Mounting Surface-mount (various brackets available)
    Environmental Rating Indoor Type 1 (IP 30)
    Maximum Cable Length 300’ (100m)
    Warranty Standard 5 year Warranty
    Length 14.0  IN
    Width 10.0  IN
    Height 5.0  IN
    Weight 2.4  LB
  • Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.