Morningstar SunSaver 10A 12V Charge Controller With LVD

Be the first to review this product

Availability: In stock

$85.99
OR

Quick Overview

  • SunSaver with LVD
  • Solar Current: 20A
  • Load Current: 20A
  • Max Current: 10.0
  • Max Power 12VDC: 120.0
  • NEMA Rating: NEMA 1 (indoor)
  • LVD:Yes
  • Warranty: 5-years
  • Morningstar SunSaver 10A 12V Charge Controller With LVD

    More Views

    Details

    Morningstar SunSaver Gen3 Charge Controllers

    Morningstar is pleased to introduce our third generation SunSaver. Since its first market introduction in 1996, over 1 million SunSaver controllers have been installed in over 73 countries for numerous solar power systems including oil/gas, telecom and instrumentation, marine and boating, and remote homes. We have retained much of our legacy design including the same ratings, footprint and simple user interface, and have added several new and advanced high value features:
    •Full electronic protections
    •4 stage battery charging
    •Self-diagnostics to detect critical faults
    •Multi-color status LED
    •3 LED’s for battery state of charge
    •Dead battery recovery
    •Telecom mode for sensitive loads
    •Maximum charge limiting for sensitive loads
    •Cover to protect wire terminals
    •Additional certifications

    KEY FEATURES AND BENEFITS

    Extremely High Reliability
    •Failure rate of less than 1 per 1,000 shipped (<0.1%)
    •100% solid state. Power MOSFET design
    •Manufactured in an ISO 9000 factory
    •100% pre-shipment functional testing

    Longer Battery Life
    •Advanced PWM charging
    •Series design (not shunt) for cool operation
    •4-stage charging: bulk, absorption, float, equalize
    •Optimized sealed or flooded battery set points
    •Temperature compensated charging
    •Low voltage load disconnect on several versions

    Designed for Harsh Environments
    •Temperature rating of –40°C to +60°C
    •Epoxy encapsulation for protection against humidity and dust ingress
    •Corrosion protection: marine rated terminals and anodized aluminum case
    •Certified for use in hazardous locations

    Easy to Install and Use
    •Factory pre-sets result in no required install settings
    •Electronic protections prevent damage from wiring mistakes
    •Fully automatic operation and fault recovery
    •LED’s display extensive information about status, faults and battery condition

    Morningstar’s SunSaver™ is the world’s leading small solar controller for both professional and consumer applications including standard features and capabilities not found in any other small PV controller.

    Specification:

    Series Sunsaver
    Manufacturer Part Number SS-10L-12V
    Warranty 5-years
    Description SunSaver with LVD
    Max Current 10.0
    Max Power 12VDC 120.0
    NEMA Rating NEMA 1 (indoor)
    System Volatge 12
    Length 7.125  IN
    Width 2.625  IN
    Height 1.625  IN
    Weight 0.68  LB

    Electrical Specifications
    Max. PV and load ratings Per above
    System voltage 12 or 24 volts
    Min. battery voltage 1 volt
    Regulation voltage Sealed battery 14.1 V, Flooded battery 14.4 V
    Load disconnect 11.5 V
    Max. solar voltage 12V battery 30 volts, 24V battery 60 volts
    Load in-rush capability 65 amps
    Self-consumption < 8 mA
    Voltage accuracy 12V: +/– 25 mV (typical), 24V: +/– 48 mV (typical)
    Transient surge protection 1500W per connection

    Electronic Protections
    • Solar: Overload, short-circuit, high voltage
    • Load: Overload, short-circuit, high voltage
    • Battery: High voltage
    • All: Reverse polarity, high temperature, lightning and transient surges
    • Reverse current at night

    Battery Charging
    • Charging method 4 stage series PWM
    • Charging stages Bulk, absorption, float, equalize
    • Temperature compensation
    * Coefficient 12V: –30mV/°C 24V: –60mV/°C
    * Range –30°C to +60°C
    * Set points Absorption, float, equalize

    LED Indications
    • Status LED (1): Charging or not charging Solar error conditions
    • Battery LED’s (3): Battery level Charging stage

    Certifications
    • ETL Listed to UL 1741 and CSA C22.2 No. 107.1-01
    • Hazardous Locations
    • EMC Directives
    • FCC
    • CE
    • RoHS
    • ISO 9000

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.