Morningstar TriStar 60 A/600 VDC 48 V MPPT charge controller

Be the first to review this product

Availability: In stock


Quick Overview

  • TriStar 60 A/600 VDC 48 V MPPT charge controller
  • Max Current: 60.0
  • Max Input Voltage: 575
  • NEMA Rating: NEMA 1 (indoor)
  • Warranty: 5-years
  • Morningstar TriStar 60 A/600 VDC 48 V MPPT charge controller

    More Views


    TriStar MPPT 600 VDC Charge Controllers

    The TS-MPPT-600V uses Morningstar’s TrakStar™ MPPT technology coupled with the widest PV input operating-voltage range available in a PV controller. The high-speed sweeping algorithm of the TrakStar™ MPPT technology enables this charge controller to harvest the maximum energy from a solar array under all ambient conditions.

    The TS-MPPT-600V charge controllers are rated for 60 A output to charge 48 VDC battery systems, and can be programmed to charge 24 VDC or 60 VDC battery systems. Their wide input operating voltage range of 100-525 VDC, 600 VDC maximum open-circuit voltage limit, and buck-boost design, allow flexible string sizing that also mitigates PV shading. A four-stage charging algorithm helps to optimize battery health.

    The TS-MPPT-600V controller is Ethernet enabled for remote communications, data logging, adjustability, and metering. Communication ports/interfaces include Ethernet, EIA-485, RS-232 and MeterBus.

    Built-in lightning protection protects the circuitry from nearby lightning-induced voltage/current spikes. The large heat sink provides convective cooling without fans, so there are no moving parts. Continuous full power operation up to 45 °C ambient temperatures. The printed circuit boards are conformal coated for protection against moisture and dust. Self-diagnostics and electronic error protections help reduce the risk of installation missteps.

    The TriStar MPPT 600 V charge controller is available with or without a pre-wired DC Disconnect Box. The pre-wired DC Disconnect Box version, the TS-MPPT-60-600V-48-DB, can be used with positively grounded or negatively-grounded PV systems and has both array and battery disconnects.

    Morningstar’s TriStar MPPT 600V Charge Controller offers a highly efficient power path for charging batteries with higher voltage photovoltaic (PV) arrays, wind turbines or hydropower systems.


    Series TriStar
    Manufacturer Part Number TS-MPPT-60-600V-48
    Warranty 5-years
    Description TriStar 60 A/600 VDC 48 V MPPT charge controller
    Max Current 60.0
    Max Input Voltage 575
    Max Power 24VDC 1724.0
    Max Power 48VDC 3448.0
    NEMA Rating NEMA 1 (indoor)
    Arc Fault Protection Requires Separate Device
    Length 18.0  IN
    Width 10.0  IN
    Height 7.0  IN
    Weight 22.0  LB


    Peak Efficiency 97.9%
    Maximum Battery Current 60A
    Maximum Input Operating Current 15A (self limiting)
    Maximum Solar Open Circuit Voltage 600V
    Nominal Maximum Operating Power**** 3200Wp, 48 Volt
    Nominal System Voltage 48 Vdc custom programmable to 24V, 36V and 60V
    Battery Operating Voltage Range 16-72 Vdc
    PV Input Operating Voltage Range 100V to Voc = 525V
    Wind/Hydro Input Operating Voltage Range Battery Voltage to 500V
    Self-Consumption 1.75 - 2.50 W
    Transient Surge Protection 4500 Watts/port

    Electronic Protections

    Input Overload, high voltage
    Battery High voltage, battery sense disconnected, remote temperature sense disconnected
    General Operation High temperature, reverse current at night, lightning and transient surges


    Ports Ethernet, EIA-485, RS-232, MeterBus
    Supported Protocols MeterBus, MODBUS RTU, MODBUS TCP/ IP, HTTP, SNMP v2, SMTP

    • CE, RoHS, NEC Compliant
    • ETL Listed: UL-1741 and Canadian CSA C22.2 No. 107.1.01
    • FCC Class B Part 15 Compliant

    • TriStar 600V Meter (TS-M-2-600V)
    • TriStar Remote Meter (TS-RM-2)
    • Meter Hub (HUB-1)
    • Relay Driver (RD-1)
    • 600V Ground Fault Protection Device (GFPD-600V)

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.