Midnite Solar (SMA) E-Panel For Triple Sunny Island System

Be the first to review this product

Availability: In stock

$1,493.99
OR

Quick Overview

  • Number of Spaces: 16.0
  • Bus Rating: 200.0
  • Max AC Voltage: 208.0
  • Max DC Voltage: 300.0
  • Main Breaker Current Rating: 250.0
  • Warranty: 5-years
  • Midnite Solar (SMA) E-Panel For Triple Sunny Island System

    More Views

    Details

  • The MNE250SMA-3PH Master E-Panel works with 2 of the MNE250SMA-Slave E-Panels to create a 3 phase system.
  • The MNE250SMA-3PH 3 phase master includes the 3 phase 60amp input/output bypass system.
  • Master E-Panel in a 3 phase system.
  • Two slaves are also required for 3 phase.

    The MNE250SMA-3PH Master E-Panel works with 2 of the MNE250SMA-Slave E-Panels to create a 3 phase system. The MNE250SMA-3PH 3 phase master includes the 3 phase 60amp input/output bypass system. This E-Panel can be used in conjunction with a Sunny Island inverter as part of a 3 phase off-grid, battery backup or AC Coupled system. Terminals are provided for hookup to leg 2 and leg 3 E-Panels. Comes with 250A battery disconnect breaker and inverter cables. Pre-wired with AC input and output wiring for leg 1 (master) inverter. (Two slaves are also required for 3 phase.)

    The 3 phase master includes the 3 phase 60amp input/output bypass system. This E-Panel can be used in conjunction with a Sunny Island inverter as part of a 3 phase off-grid, battery backup or AC Coupled system. Terminals are provided for hookup to leg 2 and leg 3 E-Panels. Comes with 250amp battery disconnect breaker and inverter cables. Pre-wired with AC input and output wiring for leg 1 (master) inverter. (Two slaves are also required for 3 phase.)

    This E-Panel does not come with a relay board, RS485 (485USPD-NR) boards or MNSPD lightning protection. RS485 boards are required when AC Coupling to SunnyBoy inverters if 3 stage charging is desired. One RS485 board goes into the master inverter and each SunnyBoy Inverter. AC Coupling to a SunnyBoy or any other grid-tie inverter is possible without RS485 boards. The Sunny Island inverter will frequency shift based on battery voltage to knock the grid-tie inverter off line. SunnyBoy inverters can switch between off-grid and grid-tie mode automatically when RS485 boards are used. To program this feature you must use either SMA service cable (USBPBS) or SMA web box (SUNNYWEBBOXU). 

    NOTE: A back plate (MNESMA-Short BP or MNESMA-Tall-BP) is recommended for the proper wiring alignment of the Sunny Island.

    Features:
  • Environmental Rating - Type 1 (Indoor)
  • 60amp, 3 phase AC output/bypass assembly
  • 3 phase AC input and output breakers
  • 2 Extra spaces on the face to the Left of the main battery breaker for the white bodied (MNEACQZD) CBI Din Rail breakers
  • 4 Extra spaces on the face to the Right of the main battery breaker for the black bodied (MNEAC or MNEPV) CBI Din Rail breakers
  • 4 Spaces on the left side and 6 spaces on the right side of the chassis for the Panel mount 3/4 inch breakers (MNEDC)
  • 500A/50mV shunt (MNSHUNT)
  • Neutral, Ground, AC IN, AC OUT and Slave busbars
  • 250amp battery breaker with inverter cables
  • AC wiring to inverter.
  • Warranty - 5 yrs.
  • Listed by ETL for US & Canada
  • Made in the USA

  • Specification:

    Brand MIDNITE SOLAR
    Manufacturer Part Number MNE250SMA-3PH MASTER
    Warranty 5-years
    NEMA Rating NEMA 1 (indoor)
    Number of Spaces 16.0
    Bus Rating 200.0
    Max Wire(main lug) 4/0 AWG
    Max AC Voltage 208.0
    Max DC Voltage 300.0
    Main Breaker Current Rating 250.0
    Type electricalDistributionSku
    Length 21.0
    Width 19.0
    Height 10.0
    Weight 42.0  LB
    Volume 3990.0  CIN

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.