Midnite Solar 115 VDC Surge Protector

Be the first to review this product

Availability: In stock

$129.99
OR

Quick Overview

  • Number of Poles: 2.0
  • Mounting: Fits in 1/2" conduit knock-out
  • Max AC Voltage: 90.0
  • Max DC Voltage: 115.0
  • Max Surge Rating: false
  • Midnite Solar 115 VDC Surge Protector

    More Views

    Details

    The MidNite Solar Surge Protective Device (MNSPD) is a Type 2 device, designed for indoor and outdoor applications. Engineered for both AC and DC electric systems, it protects both transformer and transformer-less inverters without interfering with the GFP protection circuit, it provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection. Maximum protection will only be achieved if the SPD is properly installed.

    The MidNite Solar SPD is offered in three different voltages to maximize the required protection level. Protection is achieved by reducing the clamping voltage to a safe voltage that your system can sustain without damaging any electronics in the system. By using the chart on page 2 select the SPD’s that provide the protection your system requires.

    The MidNite Solar SPD voltage rating should be chosen according to the nominal voltage of the system. Do not install an SPD with Maximum Continuous Operating Voltage (MCOV) below the nominal voltage of the system; this will deteriorate the SPD and making it unavailable when you most need it.

  • The MidNite Solar 115V Surge Protector Device (MNSPD) is a Type 2 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use.
  • Protection for battery circuits.
  • Listed by ETL for US & Canada.

    Features:

    Brand MIDNITE SOLAR
    Manufacturer Part Number MNSPD-115
    Number of Poles 2.0
    Mounting Fits in 1/2" conduit knock-out
    Max AC Voltage 90.0
    Max DC Voltage 115.0
    Type electricalDistributionSku
    Max Surge Rating false
    Length 4.625
    Width 3.5
    Height 3.375
    Weight 0.7  LB
    Volume 54.0  CIN
    Nominal Voltage 0 to 90 VAC 0 to 115 VDC
    MCOV VRMS @1mA 180V (162-198)
    ClampV @ 100A Current 8/20µs 295V
    I peak (8/20µs) (Current) 100kA (Full Device) 50kA (Each Section)
    Energy Absorption 1120 J (Full Device) 560 J (Each Section)
    Suggested Placement Up to 90 VAC circuits, 12V,24V,48V DC battery circuits
    Diagnostics

    SPD300AC -LED indicators when voltage is present between L1+Ground and L2+ground SPD115, 300DC and 600- LED Indicators when voltage is present between DC+ and DC

    Operating Temperature Range -40°c to +85°c
    Nominal Discharge Current INA 20kA
    Thermal Disconnector Internal

    Internal

    Response time <15n sec

    Performance:

    Surge Current Rating per Phase 57kA
    Short Circuit Current Rating 115kA
    T-MOVs 8
    Fusing Individually fused MOVs
    Thermal Fusing Yes
    Overcurrent Fusing Yes
    Operating Frequency 0 to 60 Hz
    Diagnostics Blue status LED, one per leg

    Mechanical Description

    Enclosure Polycarbonate UL94V-0
    NEMA Rating NEMA Type 4X
    Connection Method #12 AWG
    Mounting Method 1/2” Conduit Knockout
    Operating Altitude Sea Level – 12,000’ (3,658 Meters)
    Storage Temp -40o F to +185o F (-40o C to +85o C)
    Operating Temp -40o F to +185o F (-40o C to +85o C)
  • Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.