Magnum Battery Monitoring Kit No Shunt

Be the first to review this product

Availability: In stock


Quick Overview

  • Compatible with 12, 24, or 48 volt systems
  • Adjustable settings – very easy set up
  • Auto-detecting input voltage
  • Automatic efficiency calculation
  • Compatible Models: Use with Magnum panels
  • Warranty: 1-years
  • Magnum Battery Monitoring Kit No Shunt

    More Views


    Monitoring your battery bank is easy with the Battery Monitor Kit (ME-BMK)* from Magnum Energy. Acting as a “fuel gauge” for your batteries, the ME-BMK monitors their state of charge (SOC) and then provides this information in an easy-to-understand display via the ME-ARC or ME-RC remotes. With accurate SOC readings, you can avoid unnecessary battery recharging, saving on fuel and long-term maintenance costs. If you already have a Magnum Inverter/Charger and Magnum Remote*, the ME-BMK is an easy retrofit. Simply install the kit according to the installation manual and begin monitoring your battery bank via the “Meter” button on your ME-RC

  • Compatible with 12, 24, or 48 volt systems
  • Adjustable settings – very easy set up
  • All battery meter and Magnum inverter/charger setup and monitoring features are in a single convenient display – doesn’t require multiple displays for inverter and battery system info
  • Displays reliable and pertinent information, such as:
    •Battery State of Charge (SOC)
    •Battery Voltage
    •Battery Current
  • Auto-detecting input voltage
  • Temperature and battery bank capacity automatically compensated and coordinated between inverter and battery monitor
  • Precision 500A/50mv DC shunt (not included w/ ME-BMK-NS model)
  • Automatic efficiency calculation

  • Renewable Energy Systems Off-grid Power Back-up Power
  • Marine Systems
  • RV Systems

  • ME Series
  • MM-AE Series
  • MS Series
  • MS-PAE Series
  • RD Series

    Kit includes
  • Sense module
  • Twisted pair wire 5’ length, 18 AWG wire
  • Communication cable 10’ length, 4-conductor, telephone standard


    Manufacturer Part Number ME-BMK-NS
    DC volts 7 to 70 (±0.5%) auto voltage detection
    DC amps ±0.1 to 999 (±1.0%)
    Battery SOC % 0 to 100% (1% increments)
    Power draw < .6 watts
    Amp hours in/out ±32,768 amp hours (1 AH increments)
    rAH out (resettable amp hours removed) 0 to 65,535 amp hours, resettable (0.1 AH increments)
    tAH out (total amp hours removed) 0 to 65,535,000 amp hours (0.1 k or 100 AH increments)
    Minimum/maximim DC 7 to 70 VDC, resettable
    Sense wire Twisted pair –blue & orange, 5’ length, 18 AWG wire
    Communication cable 4-conductor, 10’ twisted pair, telephone standard
    Remote requirements Use with an ME-RC with firmware revision of 2.0 or higher or an ME-ARC (all revisions)
    Length 10.0
    Width 8.0
    Height 3.0
    Weight 2.0  LB
    Volume 240.0  CIN
    Warranty 1-year
    Compatible Models Use with Magnum panels
  • Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.